Description
The Frelan Hardware Double Pocket Door Kit provides a complete cavity-frame arrangement for two internal sliding doors that meet at the centre of the opening. Formed from anodised aluminium frames with timber liners, the system is designed around 89mm studwork and 12.5mm plasterboard to produce a 114mm finished wall and supports doors up to 100kg per leaf.
Key Facts:
- Manufacturer: Frelan Hardware
- Configuration: Double pocket door system
- Door arrangement: Two leaves meeting centrally
- Supplied components: 2 x JVPDK single pocket door kits
- Joining component: 1 x JVPDA adapter
- Soft-close and soft-open operation included as standard
- Tracks, hangers and fixings supplied
- Stud construction: 38 x 89mm / 4 x 2
- Plasterboard: 12.5mm
- Finished wall thickness: 114mm
- Internal cavity width: 57mm
- Construction: Anodised aluminium frame with timber liners
- Maximum stated door dimensions: 2040 x 860 x 44mm per leaf
- Stated door thickness suitability: 30-45mm
- Raised beading or mouldings permitted on 35mm doors where total thickness remains within 45mm
- Maximum door mass: 100kg per leaf
- Cycle tested: 100,000 working cycles
- Application: Internal residential and commercial use
- 5-year guarantee against manufacturing defects
- Doors excluded
- Finishing jambs and brushes excluded
- Not suitable for fire-rated door installations
Fit or Compatibility Note:
Specify for 89mm studwork with 12.5mm plasterboard and a finished wall thickness of 114mm. Check the size and weight of each door leaf before installation; the supplied data gives a 30-45mm door thickness range but separately states a maximum door thickness of 44mm. Finishing jambs and brushes are not part of the kit.