Description

Engraved markings for identification of pin holes. Pins made from ABS plastic for strength. Two clamps. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. 7mm (1/2 inch) shank capacity and minimum 1300 watts. The Trend CraftPro Trade work top jig for up to 700mm worktops Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. 7mm (1/2 inch) diameter and 50mm (2 inch) cut length. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved lines for short 65mm bolts and worktop cross-cut. A TCT router cutter with 12. Sold in SINGLES. Three open-ended bolt recesses (dog bone style) for 150mm bolts. Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Jig requires: A portable plunge router with 12. GB30. A template guide bush with 30mm outside diameter ref.